2 Train Master

Well good luck over here on my end I got a fictional NYCT route going using R-32/40S/R-44 subway cars letter lines are the and Both travel along the same line. North Terminals: Wash Hts-168 St South Terminal: Liverpool will be an express N/B to Wash Hts and local all the way to Liverpool will be an express S/B to Liverpool and local all the way up to Wash Hts this is starting on elevated in Wash Hts because at the moment the underground subway pack is preventing me from adding invisible stations because I would like this to be a session route. Makes no sense using an object that doesn't have passengers already there because you have to use the door controller rule at every stop and no one gets on or off kind of like what Ali3exp did with Jeffmorris layout.

local via 6th Av local runs btwn 57th and Continental via Crosstown running on the local to LES, to Bklyn via ( on the exp

207th to 59th regular service re-route via 6th Av Line then via to Bklyn for reg service. Suspended use ( service along CPW Re-routed via 6th Av to Lower East Side Which B'way or ?

Quick question after modding a subway way car how can I get the car numbers to re appear and change the font? Also this stupid message Error: Texture 'nycta_r32_body/poles.texture' is missing or could not be loaded for mesh would be appreciated

runs between 242nd and 96th St runs between Flatbush and 241st via Lexington Av Suspended runs between Dyre and 96th St-7th Av Section 2: Atlantic Av and 34th St-7th Av Terminates at Qnsboro Plaza Runs between 207th and 168th (transfer to the . Section 2: Queens,Brooklyn service normal trains terminate at Canal. ( Suspended Suspended Regular service in the Bronx to 145th relay. Section 2: terminates at Herald Sq and reg service south Shuttle service btwn Jamaica Ctr and Kew Gardens Astoria to 57th 34th to C.I via bridge Whitehall to Bay Ridge

Just an update on my status I am still willing to re-create the but I am patiently waiting until the underground subway pack gets updated so I can add invisible stations for passenger activity throughout the route.

I don't think it'd be hard to change a track object to a regular spline object and remove the track as well(thats basically all that needs to be done) so developers can put down that end station object(non-spline) on two ends lined up and attach the spline to the two points and while thats the station just an invisible station just needs to be added on whatever local track and a track to connect the insisible station to the end points and done. It may not be easier that how I think it is but thats basically whats gotta be done.

I just downloaded the new objects and signals and love them! One thing I really hate about the station splines is that there are tracks already in placement meaning no one can add an invisible station whereever.Other than that issue its fine.If you can remove those stations as "track" objects and put them as splines that would be great then we would have more flexibility I'm not a person to just create a passenger route with no passengers(activities) or anything thats plain ol' boring and too easy.I know Jeffmorris's layout is non passenger enabled because if he would had our computers would just die(not literally).Unless if its possible which I doubt can the splines be already passenger enabled?

YES!!! Thats why I said shape(not meaning person shape but platform curve radius and stuff). And yes there are 1T,2T,4T,6T,8T 12T invisible stations but I prefer the 1T because it'll be easier for example an 3t sta(2 local 1 in the middle) a 1T invisible can be placed and can be named ex. 5th Av-49th St then the uptown can be named 5th Av-49th St-N so when u do scheduling u know which 5th Av u want that train to stop at and for 3t exp stations the middle track can be like M Astoria Blvd or whatever.U can adjust passenger amount from 0 to 70 also passengers/hour,platform length going from x meters to about 250 or so which is more than enough for 10 car A-division and 10 car B-division trains. Also door openings and for curved stations theres like a size thing.

The invisible stations!! Takes less than 30 sec just line up the AJS invisible with the track u can adjust the people(shape,amount) and height/length so ALL doors will open when the train enters.It's easy. Perfect examples of Invisible stations in routes with either spline stations or just obj stations. Trainz Subway NYCT-H line(fictional) - YouTube

Yea...open doors that rule has been available for years so its nothing new or amusing.The part that sucks is no one gets on or off. Ali3exp's vids on youtube are great none of the stations are passenger enabled so its kinda a pan in the ass to use the door rule.

Great work Green Eggs! I have moved to the Northcountry in New York over the Summer and I haven't been active.I'm waiting for my extra RAM to come in the mail then hopefully Tues or Wednesday I'll be downloading the wonderful content and start on the from Astoria work will be rapid from Astoria to 14th St and if anyone volunteers to do the Manhattan Bridge section btwn Canal and Atlantic it would be appreciated if not there'll be a via Whitehall south of Prince and I'll possibly add or service from Whitehall to Bay Ridge for local service along 4th Av.

This just came to mind a request of open cut(Sea Beach) line stations. There can be 1 or 2 end pieces and the spline can be platform,beams...etc I think 2 and 4 track will do the job.Possibly an overpass for 2 and 4 track stations at the end piece. Spline: http://www.nycsubway.org/perl/show?126541 End Piece: http://www.nycsubway.org/perl/show?85836 (Overpass)

Nice! When this stuff comes out I got dibs on the Astoria to 95th St with possibly a Brighton or and Sea Beach section but I would have to make things meet at Coney.

Thanks they look GREAT!

May I request the white luminator sign: XXX HURRICANE SHELTER XXX EVACUATION CTR XXX COASTAL STORM ROUTE Source: http://www.hopetunnel.org/bus/dest/NYCTA_08-01-2006.txt If you can't include the last Coastal storm route the 1st 2 displays will be find they can blink or scroll doesn't matter.Thanks!

Use any editing program such as paint,photoshop,GIMP!

It doesn't matter as long as you have end pieces u just attatch the spline to the other end piece.It seems as if you haven't used Magiclands underground station kit. He has end pieces(non-splines) set them distance apart and attatch the spline and connect to the other.U can adjust the length,curve whatever.

Yeah so I have every screenshot teaser and maybe vids in 1 place.I don't want to deal with people asking me questions about whats that and I miss it b\c the NYCTA pics thread is so cluttered.I even missed some stuff.I'm just being more organized.

As well my project of the NYCT- are halted.Once more NYCTA stuff is released then I will make a seperate thread for the remake of the routes. In the meantime I am working on a fictional route.

Nothing special

(G)reeneggs made those already!

Dude turn the train detail all the way up which is not "normal". The shadow mesh is useless it just means the train doesn't have a shadow thats nothing so ignore it!

Ok GOOD then "train detail" and depending on your view the trucks may look different.

There's nothing wrong with his R-46. 1.It's not highlighted RED like the R-143 by Jaleel.When trains are highlighted RED it is missing possibly an attatchment or corona or something. 2.Turn up the train detail just go to options and increase the train detail and see what happens.It may be labled as polys.