Animated Buses Thread

[akamtabx36]

Hey guys i made something to try it out and i think it came out good if you like it make a request although i do not make articulated buses yet so i hope you like them i also do fronts and backs for the buses including artics .

[Broadway Local]

Nice! I can see the sign changing. :cool:

[R44 CNG]

I was trying this a while ago but the buses came out to small for a sig...Nice :cool:

[akamtabx36]

do i make the sign changing faster or should i leave it at 2 seconds?

[R44 CNG]

do i make the sign changing faster or should i leave it at 2 seconds?

 

2 sec just like the real bus, btw do you have the front of that bus

[Broadway Local]

2 sec just like the real bus, btw do you have the front of that bus

 

I made 2 secs on my animated signs too. :cool:

[akamtabx36]

2 sec just like the real bus, btw do you have the front of that bus

yes i do

I made 2 secs on my animated signs too. :cool:

 

cool

[IRT Bronx Express]

The animation is not on par since the buses move a little if you look closely. But +1 for the effort.

 

BTW, the side destination sign for the Bx36 is "Washgtn Hts" before "GW Bridge".

[R44 CNG]

[Broadway Local]

I just want it say that it's hard to make the blue beacon lights blink for less than 2 seconds while your animation speed is 2 seconds. Could that be possible?

[R44 CNG]

I just want it say that it's hard to make the blue beacon lights blink for less than 2 seconds while your animation speed is 2 seconds. Could that be possible?

 

I think its possible, but tough to figure out

[IRT Bronx Express]

I just want it say that it's hard to make the blue beacon lights blink for less than 2 seconds while your animation speed is 2 seconds. Could that be possible?

I think its possible, but tough to figure out

That is possible if you use iaza.com. Here are your options for animation in terms of timing:

 

3 seconds

2 seconds

1 second

1/2 seconds

1/4 seconds

1/5 seconds

1/10 seconds

1/100 seconds

[akamtabx36]

The animation is not on par since the buses move a little if you look closely. But +1 for the effort.

 

BTW, the side destination sign for the Bx36 is "Washgtn Hts" before "GW Bridge".

 

thanks but i did it based of the front sign even though with the LTD the sign is different but it wouldnt fit onto the little screen:o

[Broadway Local]

That is possible if you use iaza.com. Here are your options for animation in terms of timing:

 

3 seconds

2 seconds

1 second

1/2 seconds

1/4 seconds

1/5 seconds

1/10 seconds

1/100 seconds

I used iaza.com to animate my signs. :cool:

[akamtabx36]

i made another one :cool:

although i couldnt figure out how to control the beacon lights:confused:

[engineerboy6561]

i made another one :cool:

although i couldnt figure out how to control the beacon lights:confused:

 

Beautiful! As to controlling the beacons, try creating a frame for each destination sign reading with the beacons on and then another one with the beacons off. Arrange the frames like this:

 

First destination sign reading, lights off

First destination sign reading, lights on

First destination sign reading, lights off

First destination sign reading, lights on

 

Second destination sign reading, lights off

Second destination sign reading, lights on

Second destination sign reading, lights off

Second destination sign reading, lights on

 

and so on, then animate to 1/2 second instead of 2. This way, the destination sign will only change every two seconds but the beacons will blink twice per second.

[akamtabx36]

Beautiful! As to controlling the beacons, try creating a frame for each destination sign reading with the beacons on and then another one with the beacons off. Arrange the frames like this:

 

First destination sign reading, lights off

First destination sign reading, lights on

First destination sign reading, lights off

First destination sign reading, lights on

 

Second destination sign reading, lights off

Second destination sign reading, lights on

Second destination sign reading, lights off

Second destination sign reading, lights on

 

and so on, then animate to 1/2 second instead of 2. This way, the destination sign will only change every two seconds but the beacons will blink twice per second.

 

:tup: great idea its smart thank you very much would you like a bus side or front or both

[engineerboy6561]

You're welcome and I'm glad the idea worked for you.

I'd love an LFSA front signed up as:

 

Q81 via NORTHERN BL

 

Q81 +SELECT

BUS SERVICE+

 

Q81 WEST MIDTOWN

PENN STA-34 ST

 

Thank you!

[NovaBUS Fan]

 

Nice LFS!:tup:

[FamousNYLover]

Can you Nova LFS with Long Island Bus and +Select Bus Service Wrapping with:

N88 +Select Bus Service+

Jones Beach

[East New York]

Nice job Oscar. I've been so busy I missed this. I just noticed the IM right now.

[DaTransitMan4608]

oh can I get an NJT NABI with the dest sign 107L NEW YORK and a NJT MCI D4500CT that says 139X NEW YORK? I hope its not too much to ask

[akamtabx36]

sorry for the delays had Midterms this past week and couldnt do much but study anyway the animations will be posted shortly

[AlexLy]

Here's something I did recently... B)

[akamtabx36]

Can you Nova LFS with Long Island Bus and +Select Bus Service Wrapping with:

N88 +Select Bus Service+

Jones Beach

 

here you go sorry for the wait